Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across North Hollywood
Garage door repair in North Hollywood typically runs $150 – $600, and most repair calls we handle here are done same-day. We work across 91611, 91612, 91615, and 91616, and we know exactly what these older Valley garages throw at homeowners. From snapped torsion springs on a 1950s detached single-car to a roller set grinding in a sun-baked track off an alley, our trucks carry the parts for the job before we arrive. Call us at (833) 734-6940 and we’ll get a specialist to you fast, with the price quoted before any work begins.

Why Bronze Garage Door Repair Is North Hollywood’s Preferred Garage Door Repair Company
We’re a Garage Door Repair company that does one trade and nothing else. Our technicians don’t split their week between plumbing calls and door jobs. They carry torsion springs, cable drums, roller sets, and sensor parts built for the work. North Hollywood’s garage stock is old, which means weak wood jambs, out-of-square openings, and doors whose openers were bolted on decades after the door was hung. We’ve seen nearly every failure mode that comes out of those 1920s – 1950s garage structures.
Our familiarity with North Hollywood’s lots is the reason we can diagnose on the call. A homeowner off the flat blocks east of the 170 will describe a dragging one-piece tilt door and we already know the likely culprit: an unbalanced door that never should have had an opener attached. That’s not a guess. That’s just pattern recognition from running calls here. When you call us, you get someone who already knows what your door is likely fighting.
Noel Esparra founded this company to fix doors in a way that lasts. The Bronze standard means we position every repair as a durable solution, not a patch. We quote the number before we touch a bolt. You’ll never get a surprise invoice at the end of a North Hollywood repair.
Styles & brands we work with






Garage Door Roller Replacement in North Hollywood
Garage Door Roller Replacement in North Hollywood runs $110 – $220, and it’s one of the most common calls we get on the older detached garages that line the flat Valley blocks. The steel rollers used in 1950s-era doors were not built for decades of grit from dry Santa Ana wind or the weight shifts of an unbalanced door. When those rollers flat-spot or seize, the door starts jerking, dragging, and eventually binding in the track. On North Hollywood’s east-west-facing garages, afternoon sun accelerates metal fatigue and dries out the nylon in newer rollers, too.
When rollers are too far gone
You’ll hear it first. A door that grinds or shudders on the way up has a roller problem. On heavy one-piece tilt doors, a seized roller can actually pop off the hinge plate mid-cycle. If the door skips or sags on one side, don’t keep running it. A bound roller will score the track and then you’ve got a track alignment bill on top of the roller fix.
Quick swap, done right
We carry steel and nylon bearing rollers in the most common sizes found on North Hollywood’s older doors, so most replacements happen in one visit. We inspect the spindles, hinges, and track seat while we’re in there. A new roller in a warped track is a repeat failure waiting to happen, and we don’t do repeat fixes.
Commercial Garage Door Repair in North Hollywood
Commercial Garage Door Repair in North Hollywood covers the tuck-under and alley-facing doors going up along the newer multi-unit infill near the NoHo Arts District and the subway stations. Those buildings have tighter clearances, heavier doors, and openers running more cycles in a month than a house door sees in a year. Repair costs on commercial jobs typically land in the same $150 – $600 range, but the priority is same-day function for tenants and vehicles moving through.
Low headroom and tight side clearance
Multi-unit infill in North Hollywood squeezes garages into lots that weren’t drawn for them. Low headroom means torsion assemblies cramped near the ceiling. Tight side clearance means drums and end plates have to be dead square or the cable walks off the drum. We’ve pulled enough cable off the drum in those buildings to know what a 1/4-inch misalignment does.
Doors that cycle all day
An apartment or mixed-use door in North Hollywood opens dozens of times daily. Components rated for light residential use burn fast. We recommend heavier cycle-rated springs and rollers for these doors, and on a first repair we’ll tell you if the current hardware is undersized for how the door actually works. Fix it right the first time so you don’t get tenants locked out again in three months.

Trusted Brands We Service in North Hollywood
We work on Genie, Chamberlain, LiftMaster in North Hollywood, Clopay, Amarr, and Wayne Dalton systems specifically. Our techs know older Craftsman openers that have been hanging in North Hollywood garages since the 80s, and we service the modern myQ and Aladdin smart openers, too. We carry parts for the most common brands on the truck, which means faster turnaround on repairs. If your Wayne Dalton door is dragging on failing rollers or your Clopay panel is sun-cracked across the afternoon-facing side, we’ll already know the part number before we pull into your alley.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in North Hollywood Homes
The failures here aren’t the same as what a tech sees in a newer tract across the hills. They follow from how North Hollywood’s garages were built.
- Photo-eye and automatic-reversing retrofits on one-piece tilt doors. Most 1920s – 1950s detached garages in North Hollywood were never built with an opener in mind. When a homeowner adds a Genie or Chamberlain, we regularly do the reversal-sensor and cable-safety work to bring the door to post-1993 California compliance.
- Snapped torsion springs on east-west-facing garages. Afternoon sun bakes the spring steel on doors that face the sun all day. We replace springs on flat-block garages here more than anywhere else we run calls.
- Dry-rotted wood jambs and out-of-square openings. Heat and UV break down the wood around the door, so the opening shifts, the tracks go out of alignment, and the door rubs the frame. That binding tears rollers and strains openers.
- Low-headroom torsion assemblies on alley-fed lots. Narrow shared driveways off subdivided lots leave very little overhead room. Standard replacement kits don’t always clear, which is why we carry low-headroom torsion hardware and do the retrofit onsite.
Pricing for Garage Door Repair in North Hollywood, CA
Garage Door Repair in North Hollywood typically falls between $150 and $600 depending on the part and the severity of the failure. Here’s the full picture:
| Service | Typical Cost |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
What pushes a job toward the top of the range? A heavy one-piece tilt door that needs both springs and rollers, a low-headroom torsion conversion, or a door that’s been running open-loop with a dead panel for weeks. Call (833) 734-6940 for a free estimate on your specific door. Every price is quoted and agreed before we start.
We Also Serve Cities Near North Hollywood
Our garage door repair service covers Garage Door Repair in North Hollywood and the surrounding cities. If you’re in Studio City, Universal City, Burbank, or Valley Glen, the same specialist team and stocked trucks are available. Same repair, same up-front pricing, same one-call approach to fixing the whole door.
Serving North Hollywood, CA — Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in North Hollywood
Yes, we do this work regularly on North Hollywood’s older detached garages. If there’s no opener, the immediate compliance question is whether the cables and spring assemblies are safe for manual operation. If you add an opener later, California requires photo-eye sensors and automatic reversing, which we install and test as part of the opener job. We’ll inspect the door balance first, because an opener attached to an unbalanced one-piece tilt door will cook the motor in under a year. Call (833) 734-6940 and we’ll walk through what your specific door needs.
In North Hollywood, east-west-facing garage doors sit in direct afternoon sun, and that heat breaks down spring steel over years of thermal cycling. A spring that snaps, gets replaced, and snaps again almost always points to either under-specced springs for the door weight or the door itself being out of balance and wearing the spring unevenly. We size replacement springs to your actual door weight, not just the old spring’s markings. A door that’s been dragging on failed rollers will also eat springs faster, which is why we check the whole door on a spring replacement.
Yes. Low headroom and narrow alley access are the standard setup for North Hollywood’s subdivided lots, so our trucks carry low-headroom torsion hardware and shorter spring assemblies for exactly these situations. Heavy doors on tight clearances usually need the torsion assembly set precisely, with the cable drums timed so the door lifts evenly. We’ve done this in alley-fed garages across the flat blocks, including off the NoHo Arts District, and the truck is stocked for it before we arrive.
Usually it’s the springs. An opener’s job in North Hollywood is to move the door, not lift its full weight. If a torsion spring snaps or loses enough tension, the opener motor is doing the lifting and burning itself out. We check spring tension, door balance, and roller condition before condemning an opener. On many calls, replacing the springs and rollers restores a door to a clean lift and takes the strain off the opener motor entirely. If the opener was damaged by running on a dead spring, we’ll show you the wear and quote a replacement range before you decide.
Yes, we handle commercial and multi-unit garage doors in North Hollywood, including the tuck-under and alley-facing doors going up along the newer infill development near the Red Line stations. Those doors run heavy cycle counts and need heavier springs, rollers, and track hardware than a single-family door. We’ll tell you if your door’s components are undersized for the traffic they’re seeing and what upgrading costs before we start. Call (833) 734-6940 for an estimate.
Written by Noel Esparra, Owner at Bronze Garage Door Repair, serving North Hollywood since day one.